This set of pocket style arches (4 pieces) is made for the MITSUBISHI L200 1987-1996. They stick out around 8 cm, so they will cover well if you have oversize tyres.
These flares were developed for the 4-door model but they can also fit the 2-door model (some minor trimming may be required on the forward side of the rear flares).
They are made of good quality, hand-laid fiberglass and the surface is mat black gelcoat. Make sure your car is the model described above and shown in the photos. If you are in doubt, send me a few photos of your car showing the front, sides and back. I will reply and let you know if it’s the right model.
The pocket style flares were originally designed to be fitted by drilling and screwing through the flare pockets and into the side of the vehicle. But since most car owners are reluctant to drill holes on the sides of their cars, we have developed another way for installation.
Each arch can be installed by drilling and screwing self tapping screws through the underside flange and sheet metal strips which are fixed on the fiberglass. The flanges of the flares touch the car wings flanges only at the ends while at the top they remain about 2 cm lower than the car wing flanges and are fixed there by sheet metal strips. To install, removing the adjacent wheel is recommended, so that you have enough space to use the drill. The help of another person is needed to hold the flare in place while the installer drills and screws.
The arches are best installed by a professional or an experienced amateur. This is a difficult to install item. Don’t try this yourself if you don’t have enough experience.
We include the necessary screws, washers and rubber trim.
